Our Crash kits contain the usual suspects involved with MOST crashes, however we cannot predict what you'll need with EVERY crash!! :)

 

There are some minor but very important differences in the crash kits so be sure to select the proper one for YOUR helicopter.  For instance the difference between a Driven tail system (CDT) and non-Driven tail is the length of the main shaft.

 

Some crash kits also work for 2 different heli's, so again, be aware of what you have in YOUR heli.  For instance the Standard Gasser with driven tail crash kit is the SAME as the crash kit for the 44 Magnum Turbine Helicopter.

Standard Gasser #7032

We'll start off simple, The Crash kit for the Standard Gasser with the Magnum Gearbox is #7032 and includes from the top, Flybar, Main shaft. Head Axle, Tail Rotor Hub, Tail Gear set, 1 arrow shaft (TT), and a 33" Tail Boom.

Gasser EB, Intrepid Turbine #7042

The Crash Kit for the Gasser EB and Intrepid Turbine, with the HD Gearbox, is # 7042, and includes from the top, Flybar, Main shaft, Head Axle, Tail Rotor Hub, Tail Gear set, 2 Arrow Shafts (TT), and a 37" Tail Boom.

Gasser EB w/ CDT, Intrepid Turbine w/ CDT, Observer EB #7041

The Crash Kit for the Gasser EB w CDT (Driven Tail), Intrepid Turbine with CDT, and Observer EB is #7041 and includes from the top, Flybar, LONG Main Shaft, Head Axle, Tail Rotor Hub, Tail Gear set, 2 Arrow Shafts(TT), and 37" Tail Boom.

Tazer, 44 Magnum, Magnum 90, Standard Gas w/CDT #7031

The Crash Kit for the Tazer, 44 Magnum, Magnum 90 AND the Standard Gasser WITH CDT (Driven Tail) is #7031 and includes from the top, Flybar, LONG Main Shaft, Head Axle, Tail Rotor Hub, Tail Gear set, Arrow Shaft (TT), and a 33" Tail Boom.

Tazer 800, e-Observer #7034

The Crash Kit for the Tazer 800 and e-Observer is #7034 and includes from the top, Flybar, LONG Main Shaft, Head Axle, Tail Rotor Hub, Tail Gear set, 2 Arrow Shafts (TT) and a 37" boom.

Industrial Twin, Twin Observer, Industrial Turbine, Turbine Observer #TWIN 130

The Crash Kit for the Industrial Twin, Twin Observer, Industrial Turbine, and Turbine Observer is #Twin 130 and includes from the top, Flybar, LONG Main Shaft, Head Axle, Tail Rotor Hub, Tail Gear set, Tail Rotor Blades (130mm), 2 Arrow Shafts (TT), and 37" Tail Boom.  If your Tail Boom is longer due to running longer blades like 890's, then let us know in the notes section when placing your order.

If you don't see what you need here, if your configuration is a little different, NO problem!  Just give us a call, we will put together a crash package for your setup.