| Purchase Now |
| TWIN |
INDUSTRIAL TWIN HELICOPTER W/ 52CC TWIN ENGINE |
$5,700.00 |
Add |
|
The Bergen R/C Industrial Twin is a workhorse capable of lifting up to a 25 lb. payload or fly for one half hour on a tank of gas. Flight times will be reduced the heavier the payload. This big bird can be used as a Heavy Lifting UAV platform or carrying the Heavier HD format cameras in an underslung system.
The Industrial Twin uses a twin cylinder engine, producing approximately 8 horsepower, manufactured by Bergen R/C utilizing components from Zenoah G-26 engines. A single carburetor manifold is used for ease of mixture adjustment. A large, high efficiency fan provides cooling for the engine.
Power is transmitted through a heavy-duty double clutch and clutch bell to a double main gear. A fully hardened 10mm hollow main shaft turns the all aluminum head and fully ball raced aluminum blade grips. Symmetrical 810mm V-Blades are included to provide the lifting power. MAH Hi-lift 890mm blades can be substituted for increased lifting capacity.
The Industrial Twin features an aluminum torque tube to transmit power to the large aluminum tail gearbox with Delrin gears and 130 mm tail blades.
The landing gear is doubled to handle the weight of the helicopter, and 1/8th G10 frames provide the strength to hold it all together.
The Industrial Twin comes pre-assembled and test flown from the factory. It is NOT available as a kit, Only minor assembly is necessary after you receive the helicopter. We will install and use your radio gear for the test flights.
Here is an example of some test flights.
Please Call Us to Place an Order for Packages & Accessories
RADIO SYSTEMS WITH RX
LXWVT6 10CHG $ 649.99
FUTK9276 12FG $ 999.99
FUTK9301 12Z $1,499.99
SPM8800 DX8 $ 429.99
JRP2930 X9503 $ 549.99
JRP1210 12X $1,499.99
COLLECTIVE AND CYCLIC SERVOS
FUTM0222 9252 SERVO $ 84.99
FUTM0225 9255 SERVO $ 119.99
JRPS8711 8711 SERVO $ 139.99
JRPS8717 8717 SERVO $ 139.99
JR8911HV 8911HV SERVO $ 149.99
TAIL GYROS
FUTM0808 401 GYRO W/9254 SERVO $ 209.99
QUARK GYRO $ 165.00
TAIL SERVOS
FUTM0024 9254 SERVO $ 119.99
TORQ 9188 $ 150.00
BLS 254 $ 249.99
BLADES
6021 MAH 850 BLADES $ 250.00
6026 EDGE 813M BLADES $ 189.00
6024 MAH 810 BLADES $ 200.00
BATTERIES
3000 MAH BATTERY 4.8 VOLT $ 52.99
3000 MAH BATTERY 6.0 VOLT $ 65.00
5000 MAH BATTERY 7.4 VOLT $ 65.00
STABILIZATION DEVICES **
HELICOMMAND 3A $ 380.00
HELICOMMAND 3D $ 430.00
HELICOMMAND RIGID $ 480.00
AUTOPILOTS **
HELICOMMAND PROFI $ 4,500.00
HELICOMMAND PROFI W/GPS $ 6,710.00
ACE ONE $ 3,200.00
ACE WAYPOINT $11,300.00
VIDEO OPTIONS ***
VIDEO DOWNLINK ON 1.3 GHZ $ 430.00
VIDEO DOWNLINK ON 900 MHZ $ 410.00
* INCLUDES 2 BATTERIES, 2 SWITCHES, AND REGULATOR
** INCLUDES INSTALLATION IF SYSTEM IS PURCHASED THROUGH US AND HELICOPTER IS BEING BUILT BY US.
*** INCLUDES DOWNLINK SYSTEM WITH MONITOR, BATTERIES AND CHARGER
**Radio Equipment is required if we are building your helicopter, and can be purchased through us or mailed to us from your LHS.
**Purchasers from outside the United States may wish to buy their radio gear locally to insure proper service.
***SHIPPING AND HANDLING TO BE ADDED
****ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
TERMS OF PURCHASE:
The total cost of all heli radio gear and camera mount radio gear to be purchased must accompany the initial order. Building and Test Flight requires a non-reimbursable $1000 payment at time of order. The remaining balance plus shipping and handling fees are due at time of shipment. |
